Content page
From [Institution name]
Test |
Units |
Requirement |
Results |
|
---|---|---|---|---|
Overall thickness |
mm |
1.10 |
1.40 |
|
Coating thickness |
mm |
Min. 0.4 (no measurement less than 0.32) |
0.73 |
|
Load strain energy (new membrane) |
machine direction |
kN/m |
Min. 30 |
25.5Footnote (1) |
cross direction |
kN/m |
Min. 30 |
13.8Footnote (1) |
|
Load strain energy( aged membrane)
|
machine direction |
kN/m |
Min. 30 |
17.1Footnote (1) |
cross direction |
kN/m |
Min. 30 |
10.9Footnote (1) |
|
Water vapour transmission |
g/m2/d |
Max. 4.0 |
0.99 |
|
Water absorption mass |
% |
≤ 3.0 |
2.11 |
|
Static puncture |
Rating |
≥ 3 |
4 |
|
Dynamic puncture |
Rating |
≥ 3 |
4 |
|
Low temperature impact |
original |
– |
8 out of 10 pass |
Pass |
after weathering |
– |
8 out of 10 pass |
Pass |
|
Lap joint strength |
un-aged |
% |
Min. 75% of original membrane |
103 |
after heat aging |
% |
70% of original membrane |
83 |
|
Resistance to accelerated weathering |
– |
No cracking, blistering or colour change |
No change |
|
Abrasion resistance |
g |
Weight loss 0.4 |
1.63Footnote (2) |
|
mm |
Max. depth of wear 0.30 |
0.55Footnote (2) |
||
Adhesion to substrate |
solvent-based adhesive, SBA100 |
N |
≥ 125 |
249 |
water-based adhesive, WBA100 |
N |
≥ 125 |
125 |
|
Slip resistance |
dry condition |
Rating |
leather: ≥ 0.50 |
0.5 |
Rating |
rubber: ≥ 0.70 |
1.1 |
||
wet condition |
Rating |
leather: ≥ 0.60 |
0.6 |
|
Rating |
rubber: ≥ 0.65 |
0.9 |
original | – |
Material shall not crack or exhibit any visible defects |
Pass |
---|---|---|---|
after heat aging |
– |
Material shall not crack or exhibit any visible defects |
Pass |
after weathering |
– |
Material shall not crack or exhibit any visible defects |
Pass |