Content page

From [Institution name]

Galvanized and Aluminum-Zinc Alloy Coated Steel Base Material Requirements and Performance Data
Property	Requirement	Result
Thickness (mm)	≥ 0.33	0.42
Thickness of aluminum-zinc coating (g/m2)	≥ 150	171
Flexibility	No flaking or micro-cracking	Pass
Humidity resistance	No formation of blisters	Pass
Salt spray resistance	≥ 7 rating	Pass
Durability	Slight colour change; not greater than No. 8 degree of chalking; no flaking or cracking	Pass

Results of Wind Uplift Testing for Standard Five-Screw Installation of "PACIFIC Tile"^{Footnote (1)}
Pressure (kPa)	Time (min)	Requirement	Result
0.8	5	No evidence of deformation, permanent damage or failure	Pass
1.2	5	No evidence of deformation, permanent damage or failure	Pass
1.5	5	No evidence of deformation, permanent damage or failure	Pass
1.9	5	No evidence of deformation, permanent damage or failure	Pass
2.7	5	No evidence of deformation, permanent damage or failure	Pass
5.8	1	No evidence of deformation, permanent damage or failure	Pass
6.5	1	No evidence of deformation, permanent damage or failure	Pass
7.2	1	No evidence of deformation, permanent damage or failure	Pass
7.9	1	No evidence of deformation, permanent damage or failure	Pass
8.6^{Footnote (2)}	1	–	Fasteners pulled through battens

Results of Wind Uplift Testing for High Wind Ten-Screw Installation of "PACIFIC Tile"^{Footnote (1)}
Pressure (kPa)	Time (min)	Requirement	Result
0.8	5	No evidence of deformation, permanent damage or failure	Pass
1.2	5	No evidence of deformation, permanent damage or failure	Pass
1.5	5	No evidence of deformation, permanent damage or failure	Pass
1.9	5	No evidence of deformation, permanent damage or failure	Pass
2.7	5	No evidence of deformation, permanent damage or failure	Pass
5.8	1	No evidence of deformation, permanent damage or failure	Pass
6.5	1	No evidence of deformation, permanent damage or failure	Pass
7.2	1	No evidence of deformation, permanent damage or failure	Pass
7.9	1	No evidence of deformation, permanent damage or failure	Pass
8.6	1	No evidence of deformation, permanent damage or failure	Pass
9.4	1	No evidence of deformation, permanent damage or failure	Pass
10.1	1	No evidence of deformation, permanent damage or failure	Pass
10.8	1	No evidence of deformation, permanent damage or failure	Pass
11.5	1	No evidence of deformation, permanent damage or failure	Pass
12.2	1	No evidence of deformation, permanent damage or failure	Pass
13.0	1	No evidence of deformation, permanent damage or failure	Pass
13.7	1	No evidence of deformation, permanent damage or failure	Pass
14.4	1	No evidence of deformation, permanent damage or failure	Pass
15.1^{Footnote (2)}	1	–	Fasteners pulled through battens

Results of Testing the Dynamic Pressure Water Infiltration Resistance of "PACIFIC Tile"^{Footnote (1)}
Wind Speed^{Footnote (2)} (km/h)	Simulated Rainfall (L/m2·min)	Duration (min)	Requirement	Result
50	3.7	15	No leakage or damage	Pass
110	3.7	15	No leakage or damage	Pass
140	3.7	15	No leakage or damage	Pass
170	3.7	5	No leakage or damage	Pass

Notes:

Footnote 1

"PACIFIC Tile" panels were fastened with ten #10-14 × 2 in. HWH wood screws with T17 tip spaced between 70 mm and 146 mm o.c. through the vertical leg at the head lap beginning at the centre of the side lap onto 50 mm × 50 mm battens. The battens were fastened perpendicular to the wood joists spaced 304 mm o.c. with one #8-11 × 3 in. deck screw at each batten/joist intersection.

Return to footnote 1 referrer

Footnote 2

The wind speed values presented in the table are unfactored. Local exposure conditions and building heights need to be taken into consideration.

Return to footnote 2 referrer

Results of Testing the Granule Adhesion of the Products
Sample	Average Initial Weight (g)	Average Final Weight (g)	Average Weight Loss (g)
Colour quartz	65.074	64.985	0.096
Roofing granule	63.88	63.71	0.176

Language selection

Search

Content page