Content page
From [Institution name]
Property |
Unit |
Requirement |
Result |
---|---|---|---|
Compressive strength (initial) |
kPa |
≥ 150 |
392.9 |
Dynamic impact resistance (mean failure energy) |
J |
≥ 2.45 |
3 |
Creep resistance (residual thickness at 25 years/10°C) |
% |
≥ 40% at 25 years/10°C |
93.9 |
Cold bending at -30°C |
N/A |
No visible crack |
No visible crack |
Tensile strength at yield |
kN/m |
≥ 8 |
MD (1) 10.4, XDFootnote (1) 9.9 |
Tensile strength elongation at break |
% |
≥ 25 |
MD 46.5, XD 43.4 |
Heat agingFootnote (2) dimensional change |
% |
≤ 1 |
MD –02, XD –0.1 |
Heat agingFootnote (2) weight change |
≤ –0.1 |
0 |
|
Heat agingFootnote (2) residual compression strength |
≥ 80 of initial |
109 |
|
Resistance to alkaline environment appearance |
N/A |
No visible crack |
No visible crack |
Resistance to alkaline environment residual compression strength |
% |
≥ 80 of initial |
93 |
Resistance to alkaline environment cold bending at -30°C |
N/A |
No cracks at room temperature |
No visible crack |
Geometrical properties |
|||
---|---|---|---|
orientation of dimples |
− |
Report value |
Square MD/XD |
number of dimples per unit area |
Dimples/m2 |
Report value |
1 575 |
overall thickness |
mm |
Report value |
7.8 |
sheet thickness |
Report value |
0.5 |
|
hollow core thickness |
≥ 5 |
7.3 |
|
Anchorage performance |
kN/anchor |
Report value |
0.52 |