Content page
From [Institution name]
Property | Unit | Requirement | Result | |
---|---|---|---|---|
Compressive strength (initial) | kPa | 150 | 269 | |
Dynamic impact resistance (mean failure energy) | J | ≥ 2.45 | 2.6 | |
Creep resistance (residual thickness at 25 years/10°C) | % | ≥ 50% at 25 years/10°C | 81.6 | |
Cold bending at -30°C | N/A | No visible crack | No visible crack | |
Tensile strength | at yield | kN/m | ≥ 8 | XD 15.1 Footnote (1) |
elongation at break | % | ≥ 25 | XD 34.3 | |
Anisotropy Ratio | ≥ 0.5 | 1.0 | ||
Heat aging for 8 weeks | dimensional change | % | ≤ 1 | MD -0.8, XD -0.2 |
weight change | % | ≤ –0.1 | -0.1 | |
residual compression strength | % | ≥ 80 of initial | 100.2 | |
Resistance to alkaline environment | appearance | N/A | No visible crack | No visible crack |
residual compression strength | % | ≥ 80 of initial | 100.4 | |
bending resistance | N/A | No visible cracks | No visible crack | |
Geotextile fabric properties | grab tensile | N | ≥ 500 | MD 650, XD 713 |
puncture resistance | N | ≥ 100 | 236 | |
trapezoid tear resistance | N | ≥ 180 | MD 301, XD 320 | |
filtration opening size by hydrodynamic sieving | µm | ≤ 180; Report value | 120 | |
permittivity | s-1 | ≥ 0.5; Report value | 1.5 | |
UV resistance (retained strength) | % retained | 50% after 500 hours--> > 50% after 500 hours | MD 78.2, XD 88.8 | |
Hydraulic transmissivity (flow rate) | m3/h∙m | 1.33 | 4.9 | |
Geometrical Properties: | ||||
Orientation of the dimples | - | Report value | Diagonal | |
Number of dimples per unit area | dimples/m2 | Report value | 1 554 | |
Overall thickness | mm | Report value | 8.67 | |
Sheet thickness | mm | Report value | 0.51 | |
Hollow core thickness | mm | Report value | 8.16 | |
Anchorage performance | anchorage efficiency | kN/anchor | Report value | 1.13 |