Content page
From [Institution name]
| Property | Unit | Requirement |
|---|---|---|
| Insoluble material | % | ≤ 20 by mass |
| Amylaceous matter | – | No indication of the presence of amylaceous matter |
| pH of cured film | – | 2.5 ≤ pH ≤ 11.0 |
| Shear strength – compression loading | MPa | ≥ 19 average shear strength |
| Plywood shear strength (dry) | kPa | ≥ 2 800 average shear strength |
| Plywood shear strength (cold soak) | kPa | ≥ 2 800 average shear strength |
| Plywood shear strength (boil) | kPa | ≥ 2 800 average shear strength |
| Liquid working life at 21°C to 24°C | hours | ≥ 3 Footnote (1) |
| Storage life – after six months at 21°C to 24°C | – | Meets the requirements of CSA O112.7 Footnote (2) |
| Delamination (Type II only) | % | ≤ 8 of the total length of all adhesive lines |
| Creep ( environment “A”: 71°C, ambient RH for seven days) | mm | ≤ 3.63 total for two specimens combined for each environment |
| Creep ( environment “B”: 26.7°C, 90% RH for seven days) | mm | ≤ 3.63 total for two specimens combined for each environment |